Equipment → Kosmos 535 Stationary X-ray diagnostic unit for 2 workplaces

Kosmos 535 are digital stationary diagnostic X-ray devices that allow for X-ray examinations, image processing, and subsequent storage and transmission of the information obtained.

The unit consists of a table and a stand for images (1st workstation), a vertical stand for images (2nd workstation) and a high-frequency X-ray power supply.

Each workstation has a fixed wire detector as an X-ray image receiver. Kosmos 535 units allow standard X-ray examinations to be performed with various positions of the patient – lying or sitting on the imaging table, or standing using a vertical imaging stand.

Kosmos 535 units can be equipped with additional wireless flat-panel detectors with Wi-Fi interface, allowing for examinations to be performed on the imaging table deck without using the Bukki device. In the absence of a hospital LAN, it is recommended to equip this device with a specialized hardware/software “Medical Diagnostic Station” complex.

General specifications
Generator power, kW 50
Maximum anode current, mA 630
Anode voltage range, kV 40 – 150
Workplaces 2
(image table and vertical image stand)
Automatic exposure control Exposure meter at each workstation
Emitters specifications
Anode heat capacity, kHU 300
Anode type Rotating
Anode rotation speed, rpm 3000 / 10000
Anode tilt angle, degrees 12,5°
Focal spots, mm 0,6 / 1,2
X-ray diaphragm (collimator) Adjustable
Image receptor specifications
X-ray image receptor type Flat panel wired detector
Photomatrix material a-Si (amorphous silicon)
Scintillator material CsI (Cesium-Iodine)
Detector size 43х43 cm
Pixel size 140 microns
Gradational resolution 16 bit, 65536 gray values
X-ray operator workstation specifications
Operator workstation type Standalone
Display 24” color
Resolution, pixels 1920 х 1080
Brightness, cd/m2 350
User interface language Russian
Hospital LAN image transmitting interface Wire (Ethernet)